Product Development
Product Development
Our core competency in optical engineering allows us to provide optically-based design for any product or application
Where other optical consulting firms might offer only lens design services, Optikos has built its reputation on providing our clients with access to broadly skilled optical problem solvers who provide solutions and continuity of support throughout the product development cycle.
Your design can range from any single a là carte technical solution to complete product development through manufacturing.
And at project completion, you own the design.
The Optikos Management System is registered by Intertek as conforming to the requirements of:
Our core competency in optical engineering allows us to provide optically-based design for any product or application
Where other optical consulting firms might offer only lens design services, Optikos has built its reputation on providing our clients with access to broadly skilled optical problem solvers who provide solutions and continuity of support throughout the product development cycle.
Your design can range from any single a là carte technical solution to complete product development through manufacturing.
And at project completion, you own the design.
The Optikos Management System is registered by Intertek as conforming to the requirements of:
Diverse Skillsets offer Efficient Problem Solving
Diverse Skillsets offer Efficient Problem Solving
Optikos engineers team up according to the demands of the job—bringing together specialties not only in optics, but also in physics, mechanics, opto-mechanics, electronics, software, and automation.
These diverse teams and skill sets enable Optikos to offer a range of engineering skills and experience for optically-based product development that is not typically encountered or developed in most in-house engineering departments or independent consultancies.
Our engineering teams thrive in a culture of efficient problem solving, and are experienced at joining a project at any phase of the development cycle—from conceptual work to fixing existing products that don’t work. We understand the sometimes-unpredictable nature of moving products to market and we’re well-prepared to deal with it.
Optikos engineers team up according to the demands of the job—bringing together specialties not only in optics, but also in physics, mechanics, opto-mechanics, electronics, software, and automation.
These diverse teams and skill sets enable Optikos to offer a range of engineering skills and experience for optically-based product development that is not typically encountered or developed in most in-house engineering departments or independent consultancies.
Our engineering teams thrive in a culture of efficient problem solving, and are experienced at joining a project at any phase of the development cycle—from conceptual work to fixing existing products that don’t work. We understand the sometimes-unpredictable nature of moving products to market and we’re well-prepared to deal with it.
A Flexible Resource
You can work with Optikos at any point in your product development process, whether you need one specific service or a one-stop-shop. We offer a flexible, scalable resource that helps you fill a competency gap when you need it, so you can focus on the business you’re in.
A Flexible Resource
You can work with Optikos at any point in your product development process, whether you need one specific service or a one-stop-shop. We offer a flexible, scalable resource that helps you fill a competency gap when you need it, so you can focus on the business you’re in.
Hear It from the Optical Engineering Experts®
Expert-written blogs from our on-site engineering staff.
Hear It from the Optical Engineering Experts®
Expert-written blogs from our on-site engineering staff.
My First Year At Optikos, With Sam O’Connor, Optical Engineer
What’s it like to step from the university benches directly into the intense, multi-disciplinary world of optical engineering? What challenges and benefits define a typical day-to-day routine at a leading optical engineering hub? Sam O’Connor, a fresh graduate of the prestigious Institute of Optics from the University of Rochester, sheds light on what his journey […]
Planning The Future Of Thermal Camera Testing At AutoSens Europe 2025
In the United States, more than three-quarters of pedestrian fatalities happen after dark.[1] Nighttime pedestrian collisions at intersections have an 83% higher chance of being fatal without street lighting.[2] The severity of pedestrian safeguarding has prompted the US Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) to finalize a new Federal Motor Vehicle Safety […]
From Headlight Glare to Autonomous Driving: How Optikos Stray Light Testing Rules the Road in 2025
Stray light is the invisible enemy of every professional automaker in 2025. Want to build a car with adaptive headlights? You’ll need to test for stray light. Looking to develop the next craze in Advanced Driver-Assistance Systems (ADAS)? You’ll run into LiDAR technology, which needs to be vetted for stray light interference. Basically, every new […]
A Tale of Three Lenses: How Alignment Turning Creates Accurate Imaging Systems for Less
I’ve spent a good deal of my nearly 20-year career here at Optikos working on high performance imaging projects. I’ve hammered out designs with our mechanical engineers exploring the trade space between the stiffness we’d like and the compliance we need. We’ve modeled the optical and mechanical tolerances on massive computer monitors with infinite zoom […]
What’s Cooler Than Being Cool? Testing to -40°
At Optikos, we take our customer considerations stone cold serious – especially in our IQ Lab™ testing services. Every IQ Lab™ testing project starts with a discussion between the customer and our IQ Lab engineering team to ensure that we fully understand the details of their optical system to be tested and the reasons why […]
Why Doesn’t My Calculated EFL Match My Test Results?
A key part of validating optical hardware is reconciling differences between design simulations and hardware test results. Understanding the subtleties of how simulation and test results are produced, and why differences may exist, can avoid potential frustrations and delays in the hardware testing process. Many optical parameters such as effective focal length (EFL), distortion, and […]
Let's Get to Work.
Use the form below to reach out and tell us a bit about how we can assist in your next project.
Let's Get to Work.
Use the form below to reach out and tell us a bit about how we can assist in your next project.
